Chinese corrosion-resistant magnetic transmission equipment production base China's first production of continuous idling magnetic pump manufacturers
current location:Home>> Products >> Stainless Steel Pumps  Product Details
Untitled Document
TIC Non-leakage magnetic driven pump
Selection of color
Tang silver
Tang yellow
Tang Blue
Tang red
Tang Green

Model significance TICB80-65-160
T 企Enterprise Code
I International standard chemical centrifugal pump
C Magnetic drive
80 Import caliber80mm
65 Outlet aperture65mm
160 Nominal diameter of the impeller 160mm

一、Product Introduction:

Product overview:
Non-leakage magnetic driven pump(shorter form: magnetic driven pump) is application of modern magnetic principles, which is a new type pump using the magnetic transmission of permanent magnet to implement torque’s contactless transmission, that is, when electric motor drives outer rotor(i.e. outer magnetic steel) assembly rotating , under magnetic field, magnetic line of force pass through distance sleeve drive inner rotor(i.e. inner magnetic steel) assembly rotating synchronously with impeller. The purpose of pumping media without leaking is due to the media closed in still distance sleeve, which completely solve the problem of shaft seal leakage of mechanical pump. This new design industrial pump has many characteristics of full sealing, No leakage, No pollution and energy-efficient, its performance already reaches international standard, thus can replace the expensive imported chemical pump.

Advantages of the product:
1.TIC non-leakage magnetic driven pump is a new type magnetic driven pump with characteristics of full sealing, no leakage, no pollution, which is designed voluntarily by ourselves according to international standards of IS02858/GB5662/DIN24256.
2. The flowing-passed components like pump body, inner rotor, pump cover, impeller, distance sleeve, etc, are all made of superior stainless steel or special materials.
3. New type permanent magnet with good magnetism, high temperature resistant and No demagnetization is selected.
4. Shaft sleeve, sleeve bearings be made of graphite and PTFE material with good characteristic of superior wear resistance and high temperature resistance, lubrication groove setting, which guarantee the pump’s working life.
5. Enclosed static seal completely solves the problem of dielectric leakage.
6. No need of independent lubrication and cooling water, reducing energy consumption.
7. Direct coupling pull back design, no need to dismount pipe, easier maintenance.
8. Horizontal mount, compact structure, low voice, small vibration, small occupation and stable operation.
9. No contact and no friction, change coupling transmission to synchronic pulling. Power consumption of small, high efficiency, and has a damping effect, reducing vibration on the pump motor and pump in the effects of cavitations vibration when the impact of the motor.

Widely applied to many fields or processes like petroleum, chemical, acid, alkali, rare earth, smelting, pesticides, dyes, medicine, paper making, electroplate, electrolysis, acid pickling, radio, formed foil, research organizations and national defense, etc. Particularly be applicable to delivery media of flammable, explosive, volatile, toxic, strong acid and alkali, organic solvents and other expensive liquids, etc.

Performance range:
Design pressure: 1.6Mpa
Flow: 2-1400m3/h
Head: 20-125m
Power: 1.1-400kw

Applicable temperature: -30~120℃, can be up to 350℃ if using new material.

The optional accessories: preventive idling running device, monitoring of leakage device, monitoring of temperature device

Notes: Pls indicate during ordering if the proportion of delivering media is larger than 1.3mg/cm3. No idle running. No delivering media with particle or crystalline.

二、Structure drawing:

Part Material Part Material Part Material
1.pump body 304/316/316L 9.gasket PTFE 17.backbearing Gcr15
2.impeller 304/316/316L 10.outer magnet permenant magnet/HT200 18.back gland of bearing HT200
3.impeller nut 304/316/316L 11.back nut 304/316/316L 19.pump coupling 45#
4.pump shaft 304/316/316L 12.distance sleeve 304/316/316L 20.diaphragm 304
5.shaft sleeve 304/316/316L 13.connecting HT200 21.electric coupling 45#
6.thrust collar 304/316/316L 14.front gland of bearing HT200 22.shield 304
7.pump cover 304/316/316L 15.front bearing Gcr15 23.motor per clients requested
8.inner magnet 304/316/316L 16.bearing box HT200 24.base plate HT200



三、Performance Curve:

四、Performance data sheet: